12.22.14 | eric bock
Requirements This firmware version includes improvements to the Survey Receiver firmware. It is considered a minor revision. This requires a valid firmware support agreement of: ï‚· May 2014 or later for all support models NOTE: For best results, users should upgrade to Trimble Access 2014.20 or later when using Receiver Firmware version 4.93. Supported GNSS Receivers R10/R10 …
03.11.15 | eric bock
Trimble Survey GNSS Firmware Version 5.00 (March 2015) Requirements This firmware version includes improvements to the Survey Receiver firmware. This requires a valid firmware support agreement of: ï‚· May 2014 or later for all support models NOTE: For best results, users should upgrade to Trimble Access 2014.20 or later when using Receiver Firmware version 5.00. …
04.24.15 | eric bock
This firmware version includes improvements to the Survey Receiver firmware.
NOTE: For best results, users should upgrade to Trimble Access 2014.20 or later when using Receiver Firmware version 5.01.
07.6.15 | eric bock
Trimble Survey GNSS Firmware Version 5.03 (June 2015)
12.3.15 | eric bock
Trimble Survey GNSS Firmware Version 5.10 Requirements This firmware version includes improvements to the Survey Receiver firmware. NOTE: For best results, users should upgrade to Trimble Access 2015.20 or later when using Receiver Firmware version 5.10. Supported GNSS Receivers The following table identifies the Survey GNSS receivers supported by this revision. Integrated receivers: Trimble R10, …
12.30.15 | eric bock
This firmware version includes improvements to the Survey Receiver firmware.
NOTE: For best results, users should upgrade to Trimble Access 2015.20 or later when using Receiver Firmware version 5.11.
12.21.16 | eric bock
Trimble has made every effort to ensure our receivers will work seamlessly through the addition of one leap second on 31 December 2016. Our current firmware fully supports the introduction of a leap second on 31 December 2016. In simple terms, the introduction will occur at the UTC cross over between 31 December 2016 and …
02.19.15 | eric bock
Trimble VRS Now US Network Adjustment – NAD83(CORS96) 2002.00 to NAD83(2011) 2010.00 (New MountPoints Included)
09.3.14 | eric bock
TRIMBLE R10 – TRIMBLE XFILL FACT SHEET One of the most important features of the R10 is the xFill, in this article we will discuss how xFill works. With Firm Ware 4.80 and newer, xFill needs a “Warm up” period prior to use. Also make sure to check the view of the sky in the Sky …
10.14.15 | Kelli Guidry
Trimble introduced the R2 GNSS receiver, a receiver that works with Trimble® handheld devices and iOS, Android or Window® mobile handhelds, smart phones and tablets using Bluetooth® or USB connectivity. When paired with a mobile device, the receiver adds professional-grade Global Navigation Satellite System (GNSS) capabilities to enable high-accuracy data collection. The rugged and simple-to-configure …
01.18.13 | NEI Team
Trimble V4.70 WINFLASH/Firmware and release notes are now available for Trimble R10, Trimble R7 and Trimble R5 Receivers. View Link Here.
+ View Article