Custom Category: Trimble Systems

GIS Day 2022: Nov 16

It’s GIS Day on Nov 16! In recognition of the day which celebrates GIS and mapping technology around the world, we have created a new poster you can print for the office and share with your customers.   DOWNLOAD HERE

+ View Article

GPS Training – Data Collection & Processing Workshop, Hattiesburg, MS

    Trimble Geo 7X   GPS Training -Data Collection & Processing Workshop, Hattiesburg, MS NEI is excited to offer 4 new Advanced Geospatial Workshops in Hattiesburg, MS on June 7 & 8, 2016. Join us for these specialized technical workshops focusing on Trimble’s TerraSync and GPS Pathfinder Office software, and you will leave being

Mapping Buried Fiber Cable in Columbia County, GA

Congratulations to NEI Georgia Mapping/GIS Sales Representative Jeannine Hightower for her work with Columbia County on this project! Article reprinted from Point of Beginning’s website. For the full article, click here: http://www.pobonline.com/articles/97302-mapping-buried-fiber-cable-in-columbia-county-georgia   Mapping Buried Fiber Cable in Columbia County, GA – Kevin Corbley – April 5th, 2014 The GIS Department in Columbia County, Ga., is

+ View Article

Mapping Faster with the Trimble Geo 7X

As the sole Trimble MGIS Sales Representative for the State of Georgia for over 15 years, Jeannine Hightower often has to be (at least metaphorically) in several places at once. “I wish I could clone myself a few times and send myself out to the four corners of the state. Time is everything in this business.

+ View Article

NEI Geo7X Webinar Questions & Answers

Geo7X Webinar Questions & Answers NEI hosted a webinar this past summer pertaining to the new Trimble Geo7X.  The webinar was a very detailed overview of the Geo7X.  Several great questions were asked during the Geo7X Webinar, so we have detailed these Questions & Answers below: Q.  What antennas are compatible with the Geo7X? A.

New Trimble Survey GNSS Firmware Version 4.90 Update

New Trimble Survey GNSS Firmware Version 4.90 Update This firmware version includes improvements to the survey receiver firmware. For best results users should upgrade to Trimble Access version 2014.12 or later. Supported GNSS receivers: if you have any Trimble R10, R10 LT, R8 models 4 & 3, R6 models 4 & 3, R4 models 3

New Trimble Survey GNSS Firmware Version 4.91 (Sept 2014 – Corrected)

New Trimble Survey GNSS Firmware Version 4.91 (Sept 2014 – Corrected) New Trimble Survey GNSS Firmware Version 4.91 Update This firmware version includes improvements to the survey receiver firmware. For best results users should upgrade to Trimble Access version 2014.10 or later. Supported GNSS receivers: if you have any Trimble R10, R10 LT, R8 models

PDH/GISP-Eligible Geospatial Training Workshops – Norcross, GA

  Nei is excited to offer 4 new Advanced Geospatial Training Workshops in our Norcross, GA office that will be instructed by our award winning Trimble Certified Trainer.   Come join us for these specialized technical workshops focusing on Trimble’s TerraSync and GPS Pathfinder Office software, and you will leave being more productive using streamlined workflows

The Next Disruptor: Changing the Business Landscape with Imaging Rovers

  Visualization and measurement are key components of geospatial data. Imaging rovers reduce the cost of data acquisition while providing more information than ever before.   The year 2013 witnessed the emergence of several important new technologies. Unmanned aerial systems (UAS) and new solutions for field imaging dominated industry headlines—and rightfully so. They represent the next

Three Questions to Ask When Choosing a Precision GNSS Handheld Device

Collecting highly accurate, real-time spatial data has never been easier. There’s a wide range of handheld devices on the market and the best device for you depends on individual preferences and needs. While offering different methods to collect data to deliver excellent performance, consider three questions about two GIS data collectors with excellent inspection and

+ View Article

Trimble Dimensions 2014 – Save the date!

Trimble has released the dates for the 2014 Trimble Dimensions Conference, which will be held Novelber 3-5th, 2014, at the Mirage Hotels and Events Center in Las Vegas, NV. Trimble Dimensions is an educational and networking opportunity for professionals wishing to stay ahead of the curve on all different kinds of technologies and products under

+ View Article

Trimble Geo 7X Webinar

Introducing the Trimble Geo 7X Date: May 15th, 2014 | Start: 2:00 PM | End: 3:00 PM | CST Trimble Certified Instructor: Eric Bock This one-hour webinar will cover hardware and feature overviews, power and resets, calibrations, customizing the operating system, connecting to mobile device center, rangefinder, camera, loading software, resources and installation codes for the brand new Trimble Geo7X.   This

+ View Article

Trimble GIS GNSS Firmware: Leap Second Introduction on 30 June, 2015

  The world’s clocks will be adjusted by one second on 30 June 2015 when a leap second will be inserted into Coordinated Universal Time (UTC), the standard international time scale. All UTC clocks should insert a second labeled 23h 59m 60s (the leap second) following one labeled 23h 59m 59s UTC. GLONASS uses UTC

Trimble Offers More Flexibility for Surveyors with Expanded GNSS Portfolio

Trimble Now Offers Continuous RTK Level Accuracy with  Enhancement to RTX-based Trimble xFill Technology BERLIN, Oct 7, 2014—Trimble (NASDAQ:TRMB) introduced today additions to its Global Navigation Satellite System (GNSS) portfolio—the Trimble® NetR9 Geospatial receiver; the Trimble Geo7X with Trimble Access™ field software onboard; and enhanced Trimble xFill™ functionality that provides continuous RTK level accuracy when

+ View Article

Trimble Survey GNSS Firmware Version 5.01 (April 2015)

This firmware version includes improvements to the Survey Receiver firmware.
NOTE: For best results, users should upgrade to Trimble Access 2014.20 or later when using Receiver Firmware version 5.01.

WINDOWS MOBILE DEVICE CENTER CONNECTION ISSUES

Having problems connecting Your Trimble devices to Windows 10 computers? PC Operating System support of Windows Mobile Device Center Microsoft® ended support for Windows Mobile® Device Center (WMDC) in 2012; the latest Microsoft PC operating systems are not designed to be compatible with WMDC. WMDC may not work with the recently released Windows® 10 version